Soundspear S1 v1.0.0 WIN MAC
10 August 2025 | 13.7 MB
The S1 uses a VCA detection circuit on a selected frequency band to detect the signal peaks and boost the stereo spread accordingly. The image will be made wider during high-energy transients to prevent phase knockbacks.You can choose and blend between different imaging algorithms, from haas delay or classical mid-side equalization to the emulation of SRS transfer functions.The input signal is first fed to a detection circuit that reacts to the average loudness of the song, where:Threshold controls the minimum peak detection,Speed controls the intertia of the moving average from the detection circuit,Low Pass allows to filter the input detection signal with a biquad low pass filter.This detection circuit is used to dynamically adjust the stereo image of the sound:High pass and Low Pass allow to reduce the stereo adjustments to a single frequency band,Peak gain is the stereo gain that will be applied when the detection circuit hits his maximum value,Circuit allows to choose and blend between different imaging algorithms: binaural delay (Haas), head-related transfer functions (SRS) and mid-side boost (M/S).A post processing step allows to adjust the final render:Makeup applies a negative makeup gain to compensate the induced stereo variance by reducing its average value,Comp reuses the input detection circuit to apply a touch of VCA compression to the signal sides.
Please REPORT Broken Links in the Comment
